Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
Door Sensor/Switch (For Alarm): Service and Repair
Removal
1. Disconnect the negative battery cable.
2. Remove the front door trim panel.
3. Disconnect the door tamper switch electrical connector.
4. Remove the front door lock and the integral door tamper switch. Refer to Doors.
Installation
1. Install the front door lock and the integral door tamper switch.
2. Install the door tamper switch electrical connector.
3. Install the front door trim panel.
4. Connect the negative battery cable.
