Nubira CDX Wagon L4-2.0L DOHC D-TEC MFI (2000)
4. Apply glass adhesive to the windshield frame.
5. Install the windshield into the windshield frame.
6. Reposition the tape over the weatherstrip, the windshield, and the windshield frame to hold the windshield in place.
7. Let the adhesive dry for 24 hours.
8. Remove the tape.
9. Check for water leaks by pouring water on the windshield. If a leak is found, dry the windshield and fill the area that leaks with adhesive. If the
leak persists, remove the windshield and repeat the en tire procedure.
10. Install the inside rearview mirror.
11. Install the cowl vent grille.