Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Connect the electrical connector.
2. Connect the inside door handle and the lock rods.
3. Connect the outside door handle and the lock rods.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
4. Install the front door lock with the screws.
Tighten
Tighten the front door lock screws to 10 Nm (89 lb.in).
5. Install the seal trim.
6. Connect the negative battery cable.