Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
3.
Release the two (2) lock rod plastic lock tabs and remove the lock rod.
Lock Rod Installation:
1.
Install the new lock rod and reattach the two (2) plastic lock tabs.
2.
Reinstall the rear hatch inner trim panel, the four (4) retaining screws and the three (3) trim panel clips.
3.
Verify the operation of the latch rod by first setting the alarm system, then opening the rear hatch by slowly rotating the key in the cylinder.
Parts Information
Warranty Information
Technical Service Bulletin # 002-98
Date: 981125
Alarm - Triggered When Rear Hatch is Key Opened
Bulletin No.: TSB-002-98
