Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
6. Remove the crossmember link-to-crossmember bolt.
7. Remove the crossmember link.
Assembly Procedure
1. Install the crossmember link.
2. Install the crossmember link-to-crossmember bolt.
Tighten
Tighten the crossmember link-to-crossmember bolt to 114 Nm (84 ft. lbs.).
3. Install the control arms.
4. Install the split sleeves into the control arm rear connections.
5. Install the control arm-to-crossmember nuts and the bolts.
Tighten
Tighten the control arm-to-crossmember nuts to 110 Nm (81 ft. lbs.).