Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
7. Let the adhesive dry for 24 hours.
8. Remove the tape.
9. Check for waterleaks by pouring water on the rear window. If a leak is found, dry the window and fill the area that leaks with adhesive. If the leak
persists, remove the rear window and repeat the entire procedure.
10. Connect the rear window defogger electrical connector.
11. Install the rear window wiper (wagon only).
12. Connect the negative battery cable.
Quarter Window (Wagon)
Tools Required
J-24402 Glass Sealant Remover
Removal Procedure
1. Remove the quarter window molding.
2. Using the glass sealant remover J-24402, cut the adhesive around the quarter window.
3. Remove the quarter window from the vehicle.
4. Using a knife, remove the adhesive from the quarter window.
5. Using a knife, remove the adhesive from the quarter window frame.
Installation Procedure
1. Apply adhesive primer to the quarter window frame and the perimeter of the quarter window.
