Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
12. Remove the shade.
13. Remove the glass and the frame from the housing.
14. Remove the plastic trim.
15. Remove the screws and the glass from the frame.
Installation Procedure
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the glass to the frame with the screws.
Tighten
Tighten the sunroof glass screws to 7 Nm (62 lb.in).
