Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
16. Remove the plastic retainers in the headliner along the rear window.
17. Recline both front seats.
18. Remove the headliner through a rear door or the hatchback door.
Installation Procedure
1. Recline both front seats.
2. Insert the headliner through a rear door or the hatchback door.
3. Install the headliner behind the trim panels and the seals around the doors.
4. Install the plastic retainers along the rear window.
5. Install the retaining clips behind the upper B-pillar trim panels.
6. Install the left and right 0-pillar trim panels (wagon only).
7. Install the left and the right C-pillar trim panels.
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
8. Install the rear seat belt anchors and the bolts to the left and the right C-pillars.
Tighten
Tighten the rear seat belt anchor bolts to 35 Nm (26 lb.ft).
9. Install the top of the left and the right B-pillar trim panels.
10. Install the seat belt anchors with the bolts in the left and the right B-pillar panels.
Tighten
Tighten the seat belt anchor bolts to 35 Nm (26 lb.ft).
