Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
4. Slide the surge tank off its mount at the end opposite the bolt.
5. Move the surge tank out of the way to access the hydraulic modulator.
6. Disconnect the ABS solenoid connectors.
7. Disconnect the motor pack electrical connector.
8. Place a shop cloth beneath the hydraulic modulator brake pipes to prevent brake fluid from contaminating the motor pack or the electrical
connectors.
9. Disconnect the six brake pipes from the hydraulic modulator.
9.1 Plug the brake pipes to prevent loss or contamination of brake fluid.
10. Remove the bolt at the front of the base of the hydraulic modulator/motor pack assembly.
11. Remove the hydraulic modulator/motor pack assembly from the vehicle.
12. Rotate the front end of the hydraulic modulator/motor pack assembly toward the engine while pulling the back end away from the fire wall to get
