Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
8. Attach the bleeder hose to the bleeder valve. Submerge the opposite end of the hose in a clean container partially filled with brake fluid.
9. Open the bleeder valve one-half to three-fourths turn and allow the fluid to flow until no air is seen in the fluid.
NOTICE: After the bleeding operation, the brake reservoir may be pressurized. While disconnecting the bleeder hose or the unthreaded adapter
cap, cover the cap and the connection with a shop towel to protect painted surfaces from contact with the brake fluid.
10. Inspect the brake pedal for sponginess. Repeat the entire bleeding procedure to correct this condition.
11. Tighten the bleeder valve and replace the dust covers.
Tighten
Tighten the bleeder valve to 6 Nm (53 inch lbs.).
MANUAL BLEEDING THE BRAKES
1. Remove the booster reserve by applying the brakes several times with the engine off until all the reserve is depleted.
