Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Brake Pad: Service and Repair
Rear
Removal Procedure
1. Raise and suitably support the vehicle.
2. To preserve wheel balance, mark the position of the rear wheels relative to the wheel hubs and remove the wheels.
3. Remove the lower caliper mounting bolt.
Important: It is not necessary to remove the caliper to service the brake shoes.
4. Pivot the caliper upward.
5. Remove the brake shoes.
Installation Procedure
1. Measure the minimum shoe lining thickness.