Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Brake Pad: Testing and Inspection
Rear
LINING INSPECTION
1. Raise and suitably support the vehicle.
2. Remove the rear wheels.
3. Visually check the linings for minimum thickness and wear.
4. Measure the thickness.
Important: The minimum thickness of the lining is 0.2 mm (0.08 inch).
5. Install the shoe and linings in axle sets only.
6. Install the rear wheels.
7. Lower the vehicle.
