Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
10.2 Slowly open the right-side bleeder valve 1/2 to 3/4 turn.
10.3 Have an assistant press the brake pedal and hold it down until the brake fluid begins to flow.
10.4 Close the bleeder valve and have the assistant release the brake pedal. Repeat Steps 10.2 and 10.3 until no air bubbles are present.
Tighten
Tighten the bleeder valve to 9 Nm (80 inch lbs.),
10.5 Repeat the procedure for the left-side bleeder valve.
11. Remove the master cylinder reservoir cap.
12. Inspect the brake fluid level; add clean DOT 3, or equivalent, hydraulic brake fluid, if needed.
13. Install the master cylinder reservoir cap.
