Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
9. Drain the brake fluid.
Installation Procedure
1. Install the master cylinder assembly with new attaching nuts.
Tighten
Tighten the master cylinder attaching nuts to 18 Nm (13 ft. lbs.).
2. For vehicles with ABS (as shown), connect the brake lines to the cylinder body.
3. For vehicles without ABS, connect the brake lines to the proportioning valves.
Tighten
Tighten the brake lines to 16 Nm (12 ft. lbs.).
4. For vehicles with the manual transaxle, connect the clip to the clutch hose connection to the master cylinder reservoir if equipped.