Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Parking Brake Cable: Service and Repair
Removal Procedure
1. Remove the center console.
2. Remove the split pin which holds the eye bolt pull rod to the parking brake lever assembly.
3. Remove the parking brake cable ends from the equalizer.
4. Raise and suitably support the vehicle.
5. Remove the rear wheels.
6. Unfasten the parking brake cable from the lever at the rear of the backing plate.
7. Remove the clip that holds the cable into the protruding hole on the steering knuckle assembly.