Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Cruise Control: Service and Repair
Main Switch
Removal
1. Remove the radio, taking care not to scratch the instrument panel or trim with the corners of the radio case.
2. Reach through the radio opening in the instrument panel and wiggle the cruise control main switch to loosen it.
3. Push the cruise control main switch out of the instrument panel.
4. Disconnect the electrical connector from the cruise control main switch.
Installation
1. Connect the electrical connector to the cruise control main switch.
2. Push the cruise control main switch into the instrument panel until it is locked in place by its retainers.
3. Reinstall the radio, taking care not to scratch the instrument panel or trim when installing the radio case.
