Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Install a new ring seal to the coolant pump.
2. Coat the sealing surface of the ring seal with Lubriplate (R).
3. Install the coolant pump to the engine block with the flange aligned with the recess of the rear timing belt cover.
4. Secure the coolant pump to the engine block with the mounting bolts.
-
Tighten the coolant pump mounting bolts (DOHC) to 20 Nm (15 ft. lbs.).
5. Install the timing belt tension roller to the oil pump with the flange inserted into the recess of the oil pump.
6. Install the timing belt tension roller bolt. Do not tighten the bolt at this time.
7. Install the timing belt.
8. Refill the engine cooling system.
