Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
34. Rotate the engine on the engine overhaul stand KM-412.
35. Install the rear timing belt cover.
36. Install the rear timing belt cover bolts.
Tighten the rear timing belt cover bolts to 8 Nm (71 inch lbs.).
37. Install the crankshaft timing belt drive gear and bolt.
Tighten the crankshaft timing belt drive gear bolt to 130 Nm (96 ft. lbs.) plus 40° to 50° using the torque angular gauge KM-470-6.
38. Install the engine mount and retaining bolts.
Tighten the engine mount retaining bolts to 60 Nm (44 ft. lbs.).
39. Install the timing belt automatic tensioner.
40. Install the timing belt automatic tensioner bolts.
Tighten the timing belt automatic tensioner bolts to 25 Nm (18 ft. lbs.).
41. Install the timing belt idler pulley.
