Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
58. Install the front timing belt cover bolts.
Tighten the front timing belt cover bolts to 6 Nm (53 inch lbs.).
59. Install the engine lifting device.
60. Remove the engine from the engine overhaul stand KM-412.
61. Install a new crankshaft rear oil seal using installer J-36972 (or KM-635).
62. Install the flywheel or flexible plate.
63. Install the flywheel or the flexible plate bolts.
Tighten the flywheel bolts to 65 Nm (48 ft. lbs.). Use the angular torque gauge KM-470-B to tighten the flywheel bolts to 30° plus 15°. For the
automatic transmission, tighten the flexible plate bolts to 65 Nm (48 ft. lbs.).
64. Install the engine. Refer to "Engine; Service and Repari.