Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Engine Mount: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Support the engine assembly using the engine assembly lift support J-28467-B.
3. Remove the right front splash shield.
4. Remove the engine mount bracket retaining bolts.
5. Remove the engine mount bracket.
6. Remove the serpentine accessory drive belt. Refer to Steering; Power Steering Pump.
7. Remove the front timing belt cover bolts.
8. Align the crankshaft pulley timing mark with the pointer, and the camshaft gears with the timing marks on the rear cover, by turning the crankshaft
