Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
4. Install the oil pan flange-to-transaxle retaining bolts.
Tighten the oil pan flange-to-transaxle bolts to 40 Nm (30 ft. lbs.).
5. Install the catalytic converters.
Tighten the auxiliary catalytic converter-to-exhaust manifold nuts to 40 Nm (30 ft. lbs.).
Tighten the exhaust pipe support bracket bolts to 40 Nm (30 ft. lbs.).
Tighten the front muffler pipe-to-main catalytic converter nuts to 30 Nm (22 ft. lbs.).
6. Connect the post-converter oxygen sensor.
7. Connect the negative battery cable.
8. Refill the engine crankcase with engine oil.