Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Oil Pump: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the rear timing belt cover. Refer to Timing Components.
3. Disconnect the oil pressure switch connector.
4. Remove the oil pan.
5. Remove the oil pump/pickup tube and support bracket bolts.
6. Remove the oil pump/pickup tube.
7. Remove the oil pump retaining bolts.
8. Carefully separate the oil pump and gasket from the engine block and oil pan.