Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
2. Install the gasket to the oil pump and install the oil pump to the engine block with the bolts.
Tighten the oil pump bolts to 10 Nm (89 inch lbs.).
3. Install a new oil pump-to-crankshaft seal. Coat the lip of the seal with a thin coat of grease.
4. Coat the threads of the oil pump/pickup tube and support bracket bolts with Loctite(R) 242.
5. Install the oil pump/pickup tube and the bolts.
Tighten the oil pump/pick-up tube and support bracket bolts to 10 Nm (89 inch lbs.).
6. Install the oil pan.
