Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
10. Remove the crankshaft pulley bolts.
11. Remove the crankshaft pulley
12. Remove the right engine mount bracket. Refer to Engine Mount.
13. Remove the front timing belt cover bolts.
14. Remove the front timing belt cover.
15. Using the crankshaft gear bolt, rotate the crankshaft clockwise until the timing mark on the crankshaft gear is aligned with the notch at the bottom
of the rear timing belt cover.
Notice: The camshaft gears must align with the notch on the valve cover or damage to the engine could result.
16. Align the camshaft gears with the notch on the valve cover.
