Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
12. Install the crankshaft pulley bolts.
Tighten the crankshaft pulley bolts to 20 Nm (115 ft. lbs.).
13. Install the serpentine accessory drive belt. Refer to Steering; Power Steering Pump.
14. Install the right front splash shield.
15. Install the right front wheel.
16. Install the air filter housing.
17. Install the air filter housing bolts.
Tighten the air filter housing bolts to 8 Nm (71 inch lbs.).
18. Connect the air intake tube to the throttle body
19. Connect the breather tube to the valve cover.
20. Connect the intake air temperature sensor connector.
21. Connect the negative battery cable.
