Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
12. Remove the rear timing belt cover bolts.
13. Remove the rear timing belt cover.
Installation Procedure
1. Install the rear timing belt cover.
2. Install the rear timing belt cover bolts.
Tighten the rear timing belt cover bolts to 6 Nm (53 inch lbs.).
3. Install the engine mount and retaining bolts.
Tighten the engine mount retaining bolts to 60 Nm (44 ft. lbs.).
4. Install the timing belt idler pulleys.
5. Install the timing belt idler pulley bolt and nut.
Tighten the timing belt idler pulley bolt to 25 Nm (18 ft. lbs.).
Tighten the timing belt idler pulley nut to 25 Nm (118 ft. lbs.).
