Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Install the temperature control cable eyelet to the post on the controller.
2. Snap the cable housing connector to the slide position on the controller.
3. Gently insert the controller into position on the center console.
4. Install the four controller retaining screws.
Tighten
Tighten the HVAC controller retaining screws to 2 Nm (18 lb.in).
5. Install the temperature control cable eyelet to the post on the temperature door lever.
6. Snap the cable retainer to the blower housing.
