Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Installation Procedure
1. Install the filter into its cavity in the bulkhead.
-
Align the fins on the plastic frame of the filter with the grove in the holder before attempting to insert the fitter into place.
2. Hold the vacuum tank in place over its mounting studs on the bulkhead.
3. Install the nuts to secure the vacuum tank to the bulkhead.
Tighten
Tighten the vacuum tank-to-bulkhead nuts to 4 Nm (35 lb.in).