Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Condenser HVAC: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Discharge and recover the refrigerant.
3. Remove the radiator.
4. Loosen the high-pressure pipe clamp on the wheel arch to allow moving the pipe.
5. Remove the high-pressure pipe retaining block nut and remove the pipe from the receiver-dryer.
6. Remove the discharge hose mounting block nut.
7. Remove the discharge hose mounting from the con denser.
8. Remove the upper condenser mount nuts.
9. Tilt the condenser to the rear, away from the radiator mount support.
