Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
5. Install a new O-ring high pressure pipe mounting block fitting.
6. install the high pressure pipe to the receiver-dryer connecting block nut.
Tighten
Tighten the high pressure pipe-to-receiver-dryer connecting block nut to 10 Nm (89 lb.in).
7. Install a new O-ring onto the discharge hose mounting block fitting.
8. Install the discharge hose mounting block nut.
Tighten
Tighten the discharge hose mounting block-to-condenser nut to 16 Nm (12 lb.ft).
9. Install the radiator.
10. Connect the negative battery cable.
11. Evacuate and recharge the A/C system.