Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Install the new O-ring seal on the transducer.
2. Install the transducer.
Tighten
Tighten the pressure transducer to 10 Nm (89 lb.in).
3. Install the wire connector.
4. Install the air cleaner housing assembly.
4.1 Seat the housing in its place with the pick-up tube in the hole provided.
4.2 Install the air cleaner housing assembly retaining bolts.
Tighten
Tighten the air cleaner housing assembly retaining bolts to 12 Nm (106 lb.in).
4.3 Connect the tube to the intake manifold.
5. Connect the negative battery cable.
6. Evacuate and recharge the A/C system.