Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
10. Remove the crankshaft pulley bolts.
11. Remove the crankshaft pulley
12. Remove the right engine mount bracket. Refer to Engine Mount.
13. Remove the front timing belt cover bolts.
14. Remove the front timing belt cover.
15. Rotate the crankshaft at least one full turn clockwise using the crankshaft gear bolt.
16. Align the mark on the crankshaft gear with the notch at the bottom of the rear timing belt cover.
17. Align the camshaft gear timing marks. Use the exhaust gear mark for the exhaust gear and the intake gear mark for the intake gear, since the gears
are interchangeable
