Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Connect the PCM/ECM connectors to the PCM/ECM.
2. Insert and align the PCM/ECM into the mounting base.
3. Insert the retaining clip lower end into the mounting base.
4. Connect the retaining clip to the mounting base.
5. Install the passenger side kick panel. Refer to Interior Trim.
6. Connect the negative battery cable.
7. Perform a crankshaft position system variation learning procedure. Refer to "DTC P1336".
