daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

ABOUT US
Coolant Temperature Sensor/Switch (For Computer) > < Engine Control - Crankshaft Variation Learning Procedure|Page 1621

Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)

Page 2
background image

1. Install the camshaft position sensor and bolts.

Tighten
Tighten the camshaft position sensor bolts to 12 Nm (106 lb-in).

2. Install the timing belt front cover, the crankshaft pulley, the accessory drive belt, and the air filter. Refer to DOHC Engine Mechanical.
3. Connect the sensor electrical connector.
4. Install the engine cover.
5. Connect the negative battery cable.

Coolant Temperature Sensor/Switch (For Computer) > < Engine Control - Crankshaft Variation Learning Procedure|Page 1621