Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Canister Purge Solenoid: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Disconnect the evaporative (EVAP) emission canister purge solenoid connector.
3. Disconnect the vacuum hoses from the EVAP emission canister purge solenoid.
4. Remove the EVAP emission canister purge solenoid bracket bolt from the intake manifold.
5. Unclip the EVAP emission canister purge solenoid from the mounting bracket.
INSTALLATION PROCEDURE
1. Attach the EVAP emission canister purge solenoid to the mounting bracket.
2. Install the EVAP emission canister purge solenoid and the mounting bracket with the bracket bolt.
Tighten
Tighten the EVAP emission canister purge solenoid bracket bolt to 5 Nm (44 lb-in).
3. Connect the vacuum hoses to the EVAP emission canister purge solenoid.
4. Connect the EVAP emission canister purge solenoid connector.
5. Connect the negative battery cable.