Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Connect the electrical connector at the fuel cutoff switch.
2. Install the fuel cutoff switch mounting bolts.
Tighten
Tighten the fuel cutoff switch mounting bolts to 3 Nm (27 lb-in).
3. Reposition the carpet.
4. Install the lower B-pillar trim panel. Refer to Interior Trim.
5. Install the passenger front rocker trim panel. Refer to Interior Trim.
6. Connect the negative battery cable.
IMPORTANT: The fuel cutoff switch may have to be reset to enable the vehicle to start.