Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Insert the CKP sensor into the engine block.
2. Install the CKP sensor retaining bolt.
Tighten
Tighten the crankshaft position sensor retaining bolt to 10 Nm (89 lb-in).
3. Connect the CKP sensor connector to the fuel injector channel cover.
4. Install the accessory mounting bracket.
Tighten
Tighten the accessory mounting bracket bolts to 35 Nm (26 lb-ft).
5. Install the rear A/C mounting bracket, if equipped.
Tighten
Tighten the rear A/C mounting bracket bolts to 35 Nm (26 lb-ft).
6. Install the A/C compressor, if equipped. Refer to Manual Control Heating, Ventilation, and Air Conditioning System.
7. Install the power steering pump, if equipped. Refer to Power Steering Pump.
8. Connect the negative battery cable.
