daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Knock Sensor|Description and Operation|Page 1226

Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)

Page 2
background image

1. Install the KS.

Tighten
Tighten the knock sensor bolt to 20 Nm (15 lb-ft).

2. Connect the electrical connector at the KS.
3. Remove the intake manifold. Refer to DOHC Engine Mechanical.
4. Connect the negative battery cable.

Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Knock Sensor|Description and Operation|Page 1226