daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Disabling the SIR System|Page 3680 > < Sensing and Diagnostic Module (SDM) <--> [Air Bag Control Module]|Locations|Page 3674
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Disabling the SIR System

Disabling The SIR System

CAUTION:  The Sensing and Diagnostic Module (SDM) can maintain sufficient voltage to deploy the airbags for 10 minutes after the ignition
is OFF and the airbag fuse has been removed. If service begins before the SIR system is disabled, the result could be unexpected deployment of
the airbag which could cause personal injury and unnecessary SIR system repairs.

1. Turn the ignition to LOCK and remove the key.

2. Remove the airbag fuse (F6).
3. Wait 10 minutes for the SIR capacitor to discharge.

Disabling the SIR System|Page 3680 > < Sensing and Diagnostic Module (SDM) <--> [Air Bag Control Module]|Locations|Page 3674