Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
IMPORTANT: This test should be made for each ground or insulated brush to ensure continuity through both brushes and leads. If the lamp fails
to light, the field coil is open and will require replacement.
5. Use the following procedure for only those starters having a shunt coil connection: using a test lamp, place one lead on the shunt coil terminal and
connect the other lead to a ground brush or insulated brush.
6. When testing series coils for ground, separate the series and the shunt coil strap terminals during the test.
6.1 Make sure the strap terminals are not touching the case or the other ground.
6.2 Using a test tamp, place one lead on the grounded brush holder and the other lead on either insulated brush.
6.3 If the lamp is lit, a grounded series coil is indicated and must be repaired or replaced.
6.4 To test for an open circuit, on each insulated brush, place one lead on the series coil terminal and the other lead on the insulated brush.
6.5 If the test lamp is not lit, the series coil is open and will require repair or replacement.
