Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Power Steering Line/Hose: Service and Repair
Power Steering Pump Hoses and Pipes
Removal Procedure
1. Siphon the power steering fluid from the fluid reservoir.
2. Disconnect the pressure line pipe and the supply line hose from the inlet and the outlet connections on the power steering pump.
3. Raise and suitably support the vehicle.
4. Disconnect the pressure line from the retaining clip at the bottom of the radiator.
5. Disconnect the supply line from the retaining clip on the engine compartment right sidewall.
6. Lower the vehicle.
IMPORTANT: The pressure line inlet pipe nut will be easier to disconnect if the supply line outlet pipe nut is disconnected first.