Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
5. Connect the supply line to the retaining clip on the engine compartment right sidewall.
6. Connect the pressure line to the retaining clip at the bottom of the radiator.
7. Connect the pressure line pipe and the supply line hose to the inlet and the outlet connections on the power steering pump.
Tighten
Tighten the power steering pump pressure line union nut to 27 Nm (20 ft. lbs.).
NOTICE: When adding fluid or making a complete change, always use DEXRON-III power steering fluid. Failure to use the proper fluid will
cause hose and seal damage and fluid leaks.
8. Fill the fluid reservoir with power steering fluid.
9. Inspect for leaks. If there are leaks, correct the cause of the leaks and bleed the system. See: Power Steering Bleeding
