Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Steering Gear: Service and Repair
Hydraulic Cylinder Lines
Removal Procedure
1. Siphon the power steering fluid from the fluid reservoir.
2. Raise and suitably support the vehicle.
3. Disconnect the power steering gear hydraulic cylinder pipes from the power steering gear at the valve end. Replace the O-ring seals as needed.
4. Disconnect the power steering gear hydraulic cylinder pipes from the power steering gear at the cylinder end.
5. Unclip the steering gear hydraulic cylinder pipes from the power steering fluid reservoir return line and remove them from the vehicle.
Installation Procedure
1. Lubricate any new O-ring seals with power steering fluid.
2. Place the O-ring seals into the housing and install the steering gear hydraulic cylinder pipes.
