Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
2. Install the dash seal retaining ring with the nuts.
Tighten
Tighten the dash seal retaining ring nuts to 9 Nm (80 inch lbs.).
IMPORTANT: When attaching the upper universal joint, the steering wheel must be placed in the straight-ahead position with the spokes
pointing down.
3. Attach the upper universal joint of the intermediate shaft onto the steering column.
4. Install the pinch bolt into the upper universal joint on the intermediate shaft and tighten the bolt.
Tighten
Tighten the upper intermediate shaft pinch bolt to 25 Nm (18 ft. lbs.).
IMPORTANT: When attaching the lower universal joint, the marks on the intermediate shaft and on the stub shaft should line up.
5. Attach the lower universal joint of the intermediate shaft onto the steering gear stub shaft.
