Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Steering Wheel: Service and Repair
STEERING WHEEL WITH SIR
Tools Required
KM-210-A Steering Wheel Puller
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the supplemental inflatable restraints (SIR) module.
3. Remove the steering wheel nut and the retaining clip.
IMPORTANT: In order to install the steering wheel correctly, match-mark the steering column shaft to the steering wheel.
4. Remove the steering wheel using the steering wheel puller KM-210-A.
5. Unclip the contact ring from the steering wheel, if necessary.
Installation Procedure
1. Clip the contact ring on the steering wheel, if necessary.
IMPORTANT: In order to install the steering wheel correctly, match-mark the steering column shaft to the steering wheel.
2. Align the match marks on the steering wheel and the steering column shaft. Turn the signal canceling cam on the wheel to the left.