Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Control Arm Bushing: Service and Repair
CONTROL ARM BUSHINGS
Tools Required
KM- 158 Remover/Installer
Disassembly Procedure
1. Remove the control arm.
2. Remove the split sleeves from the rear control arm bushing.
3. Press off the control arm rear damping bushing using a press and the remover/installer KM-158.
4. Press out the control arm front damping bushing using a press and the remover/installer KM-158.
Assembly Procedure
