Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Rear Knuckle: Service and Repair
Removal and Installation
Removal Procedure
1. Raise and suitably support the vehicle.
2. Remove the wheel.
3. On vehicles equipped with the antilock braking system, remove the ABS speed sensor.
4. On vehicles equipped with rear disc brakes, remove the rear brake caliper from the knuckle assembly.
5. Disconnect the parking brake from the knuckle assembly.
6. Disconnect the front parallel link from the knuckle.
7. Disconnect the rear parallel link from the knuckle.
8. Disconnect the rear trailing link from the rear knuckle.
9. On vehicles equipped with rear drum brakes, remove the clip securing the brake line to the strut assembly.
10. On vehicles equipped with rear drum brakes, disconnect the brake line from the knuckle assembly.
11. Remove the rear knuckle-to-strut assembly nuts and the bolts.
