Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
1. Install the strut assembly.
2. Connect the strut assembly to the steering knuckle by installing the steering knuckle-to-strut assembly nuts and the bolts.
Tighten
Tighten the steering knuckle-to-strut assembly nuts and the bolts to 100 Nm (74 ft. lbs.).
3. Connect the stabilizer shaft link to the strut assembly by attaching the stabilizer link-to-strut assembly nut.
Tighten
Tighten the stabilizer link-to-strut assembly nut to 47 Nm (35 ft. lbs.).
