Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
6. Remove the upper strut mount, the mount bearing, the upper spring seat, the front spring locator, the upper ring insulator, and the hollow bumper.
7. Release the spring.
8. Remove the spring and the lower ring insulator.
Assembly Procedure
1. Install the lower ring insulator and the spring.
2. Compress the spring using the spring compressor KM-329-A.
3. Install the hollow bumper, the upper ring insulator, the front spring locator, the upper spring seat, the upper strut mount, and the mount bearing. Be
sure the upper spring seat is clipped to the front spring locator.
