Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Case: Service and Repair
On-Vehicle Service
CASE SIDE COVER PAN AND GASKETS
Tools Required
J-28467-B Engine Support Fixture
Removal Procedure
1. Disconnect the negative battery cable.
2. Install the engine support fixture J-28467-B.
3. Raise and suitably support the vehicle.
4. Remove the front exhaust pipe. Refer to Exhaust System.
5. Remove the left wheel.
6. Remove the left drive axle. Refer to Drive Axles, Bearings and Joints.
7. Remove the battery and the battery tray.
8. Remove the left transaxle mount.
9. Lower the engine until the side cover is accessible.
10. Remove the shifter linkage and the Park/Neutral Position (PNP) switch.
11. Remove the side cover bolts (3 and 4), the side cover (1), and the gaskets (6 and 7).
Installation Procedure